< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=3131724&fmt=gif" />

Deploy Kubernetes and Kubesphere on Bare Metal

Introduction

In addition to the deployment on cloud, KubeSphere can also be installed on bare metal. As the virtualization layer is removed, the infrastructure overhead is drastically reduced, which brings more compute and storage resources to app deployments. As a result, hardware efficiency is improved. Refer to the example below to deploy KubeSphere on bare metal.

Prerequisites

  • Make sure you already know how to install KubeSphere on a multi-node cluster based on the tutorial Multi-node Installation.
  • Server and network redundancy in your environment.
  • For a production environment, it is recommended that you prepare persistent storage and create a StorageClass in advance. For development and testing, you can use the integrated OpenEBS to provision LocalPV as the storage service directly.

Prepare Linux Hosts

This tutorial uses 3 physical machines of DELL 620 Intel (R) Xeon (R) CPU E5-2640 v2 @ 2.00GHz (32G memory), on which CentOS Linux release 7.6.1810 (Core) will be installed for the minimal deployment of KubeSphere.

Install CentOS

Download and install the image first, and CentOS Linux release 7.6.1810 (Core) is recommended. Make sure you allocate at least 200 GB to the root directory where it stores docker images (you can skip this if you are installing KubeSphere for testing).

For more information about the supported systems, see System Requirements.

Here is a list of the three hosts for your reference.

Host IPHost NameRole
192.168.60.152master1master1, etcd
192.168.60.153worker1worker
192.168.60.154worker2worker

NIC settings

  1. Clear NIC configurations.

    ifdown em1
    
    ifdown em2
    
    rm -rf /etc/sysconfig/network-scripts/ifcfg-em1
    
    rm -rf /etc/sysconfig/network-scripts/ifcfg-em2
    
  2. Create the NIC bonding.

    nmcli con add type bond con-name bond0 ifname bond0 mode 802.3ad ip4 192.168.60.152/24 gw4 192.168.60.254
    
  3. Set the bonding mode.

    nmcli con mod id bond0 bond.options mode=802.3ad,miimon=100,lacp_rate=fast,xmit_hash_policy=layer2+3
    
  4. Bind the physical NIC.

    nmcli con add type bond-slave ifname em1 con-name em1 master bond0
    
    nmcli con add type bond-slave ifname em2 con-name em2 master bond0
    
  5. Change the NIC mode.

    vi /etc/sysconfig/network-scripts/ifcfg-bond0
    BOOTPROTO=static
    
  6. Restart Network Manager.

    systemctl restart NetworkManager
    
    nmcli con # Display NIC information
    
  7. Change the host name and DNS.

    hostnamectl set-hostname worker-1
    
    vim /etc/resolv.conf
    

Time settings

  1. Synchronize time.

    yum install -y chrony
    
    systemctl enable chronyd
    
    systemctl start chronyd
    
    timedatectl set-ntp true
    
  2. Set the time zone.

    timedatectl set-timezone Asia/Shanghai
    
  3. Check if the ntp-server is available.

    chronyc activity -v
    

Firewall settings

Execute the following commands to stop and disable the FirewallD service:

iptables -F
systemctl status firewalld
systemctl stop firewalld
systemctl disable firewalld

Package updates and dependencies

Execute the following commands to update system packages and install dependencies.

yum update
yum install openssl openssl-devel
yum install socat
yum install epel-release
yum install conntrack-tools

Note

You may not need to install all the dependencies depending on the Kubernetes version to be installed. For more information, see Dependency Requirements.

Download KubeKey

Kubekey is the next-gen installer which provides an easy, fast and flexible way to install Kubernetes and KubeSphere.

Follow the step below to download KubeKey.

Download KubeKey from its GitHub Release Page or use the following command directly.

curl -sfL https://get-kk.kubesphere.io | VERSION=v3.0.7 sh -

Run the following command first to make sure you download KubeKey from the correct zone.

export KKZONE=cn

Run the following command to download KubeKey:

curl -sfL https://get-kk.kubesphere.io | VERSION=v3.0.7 sh -

Note

After you download KubeKey, if you transfer it to a new machine also with poor network connections to Googleapis, you must run export KKZONE=cn again before you proceed with the steps below.

Note

The commands above download the latest release of KubeKey. You can change the version number in the command to download a specific version.

Make kk executable:

chmod +x kk

Create a Multi-node Cluster

With KubeKey, you can install Kubernetes and KubeSphere together. You have the option to create a multi-node cluster by customizing parameters in the configuration file.

Create a Kubernetes cluster with KubeSphere installed (for example, --with-kubesphere v3.3.2):

./kk create config --with-kubernetes v1.22.12 --with-kubesphere v3.3.2

Note

  • Recommended Kubernetes versions for KubeSphere 3.3: v1.20.x, v1.21.x, * v1.22.x, * v1.23.x, and * v1.24.x. For Kubernetes versions with an asterisk, some features of edge nodes may be unavailable due to incompatability. Therefore, if you want to use edge nodes, you are advised to install Kubernetes v1.21.x. If you do not specify a Kubernetes version, KubeKey will install Kubernetes v1.23.10 by default. For more information about supported Kubernetes versions, see Support Matrix.

  • If you do not add the flag --with-kubesphere in the command above, KubeSphere will not be deployed unless you install it using the addons field in the configuration file or add this flag again when you use ./kk create cluster later.

  • If you add the flag --with-kubesphere without specifying a KubeSphere version, the latest version of KubeSphere will be installed.

A default file config-sample.yaml will be created. Modify it according to your environment.

vi config-sample.yaml
apiVersion: kubekey.kubesphere.io/v1alpha1
kind: Cluster
metadata:
  name: config-sample
spec:
  hosts:
  - {name: master1, address: 192.168.60.152, internalAddress: 192.168.60.152, user: root, password: P@ssw0rd}
  - {name: worker1, address: 192.168.60.153, internalAddress: 192.168.60.153, user: root, password: P@ssw0rd}
  - {name: worker2, address: 192.168.60.154, internalAddress: 192.168.60.154, user: root, password: P@ssw0rd}
  roleGroups:
    etcd:
    - master1
    control-plane:
    - master1
    worker:
    - worker1
    - worker2
  controlPlaneEndpoint:
    domain: lb.kubesphere.local
    address: ""                    
    port: 6443

Create a cluster using the configuration file you customized above:

./kk create cluster -f config-sample.yaml

Verify the installation

After the installation finishes, you can inspect the logs of installation by executing the command below:

kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l 'app in (ks-install, ks-installer)' -o jsonpath='{.items[0].metadata.name}') -f

If you can see the welcome log return, it means the installation is successful.

**************************************************
#####################################################
###              Welcome to KubeSphere!           ###
#####################################################
Console: http://192.168.60.152:30880
Account: admin
Password: P@88w0rd
NOTES:
  1. After you log into the console, please check the
     monitoring status of service components in
     the "Cluster Management". If any service is not
     ready, please wait patiently until all components
     are up and running.
  2. Please change the default password after login.
#####################################################
https://kubesphere.io             20xx-xx-xx xx:xx:xx
#####################################################

Log in to the console

You will be able to use default account and password admin/P@88w0rd to log in to the console http://{$IP}:30880 to take a tour of KubeSphere. Please change the default password after login.

Enable pluggable components (Optional)

The example above demonstrates the process of a default minimal installation. To enable other components in KubeSphere, see Enable Pluggable Components for more details.

System Improvements

  • Update your system.

    yum update
    
  • Add the required options to the kernel boot arguments:

    sudo /sbin/grubby --update-kernel=ALL --args='cgroup_enable=memory cgroup.memory=nokmem swapaccount=1'
    
  • Enable the overlay2 kernel module.

    echo "overlay2" | sudo tee -a /etc/modules-load.d/overlay.conf
    
  • Refresh the dynamically generated grub2 configuration.

    sudo grub2-set-default 0
    
  • Adjust kernel parameters and make the change effective.

    cat <<EOF | sudo tee -a /etc/sysctl.conf
    vm.max_map_count = 262144
    fs.may_detach_mounts = 1
    net.ipv4.ip_forward = 1
    vm.swappiness=1
    kernel.pid_max =1000000
    fs.inotify.max_user_instances=524288
    EOF
    sudo sysctl -p
    
  • Adjust system limits.

    vim /etc/security/limits.conf
    *                soft    nofile         1024000
    *                hard    nofile         1024000
    *                soft    memlock        unlimited
    *                hard    memlock        unlimited
    root             soft    nofile         1024000
    root             hard    nofile         1024000
    root             soft    memlock        unlimited
    
  • Remove the previous limit configuration.

    sudo rm /etc/security/limits.d/20-nproc.conf
    
  • Reboot the system.

    reboot
    

Receive the latest news, articles and updates from KubeSphere


Thanks for the feedback. If you have a specific question about how to use KubeSphere, ask it on Slack. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.